Suunto AMBIT3 RUN 1.0 Guide D'utilisation page 60

To pair a POD or heart rate sensor:
1. Activate the POD or heart rate sensor.
If you are pairing a Suunto Smart Sensor, see
du Suunto Smart Sensor .
2. Keep [Next] pressed to enter the options menu.
3. Scroll to PAIR with [Light Lock] and select with [Next].
4. Scroll the options with [Start Stop] and [Light Lock] and press
[Next] to select a POD or heart rate sensor to pair.
5. Hold your Suunto Ambit3 Run close to the device you are pairing
and wait for Suunto Ambit3 Runto notify that pairing was
successful.
If the pairing fails, press [Start Stop] to retry, or [Light Lock] to
return to the pairing setting.
60
3.9.2 Installation