Technical Data - LaserLiner HandyLaser Mode D'emploi

4
To fit wall tiles
To fit wall tiles, the device is attached to the first
tile by means of the spring-clamp holder that is
pushed out with the pins at the rear. The laser
beam that runs parallel to the horizontal spirit
level is directed along the edge of the tile. This
makes it possible to precisely align the tile with
the bubble level.
5
90° beam splitter
(depending on product version)
The 90° beam splitter allows the laser beam to be
additionally deflected by 90°.

Technical data

Vial accuracy
Laser applications
Laser wavelength
Laser class
Power supply
Operating temperature
Storage temperature
Weight (incl. batteries)
Dimensions (W x H x D)
Subject to technical change without notice. 01/2015
08
GB
0,5 mm / m
50 m
650 nm
2 / < 1 mW
2 x 1,5V AAA
0 °C ... + 50 °C
-10 °C ... + 70 °C
128 g
210 x 59 x 62 mm