Technical Data; Ec Declaration Of Conformity - HSM Multishred one-4-all Mode D'emploi

6 Cleaning
Switch off the shredder and pull out the mains
plug.
When cleaning only use a soft cloth and a mild
soap-water solution. However, no water must
enter the equipment.

8 Technical data

Cutting type
Shred size
Cutting ca pa ci ty per cycle
Cutting speed
Voltage
Max. operating time
Dimensions W x D x H
Weight
Volume of shredded material container

EC Declaration of Conformity

HSM GmbH + Co. KG, Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine, referred to here as
document shredder HSM Multishred one-4-all
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 13857:2008
• EN 55014-2:1997 + A1:2001
• EN 61000-3-3:2008
Frickingen, 01.03.2010
Rolf Gasteier - Technical Director
10
7 Disposal / Recycling
the environment. Never dispose of old devices
in the household waste. Observe the current
applicable regulations and use the collection
points for returning and recycling electric and
electronic devices. Dispose of all the packaging
materials also in an environmentally-responsi-
ble way.
Cross cut
1/8" x 1 1/8" (4 x 35 mm)
1 fl oppy disc or 1 CD
or 1 credit card
or 8 sheets of folded
paper (80 g/m
5 ft/min (25 mm/s)
120 V / 60 Hz
220-240 V / 50-60 Hz
5 min
9.5" x 8" x 11.4"
(241 x 202 x 288 mm)
12 lbs. (5.3 kg)
0.92 gal (3.5 l)
• EN 55014-1:2006
• EN 61000-3-2:2006
shredstar Multishred one-4-all
english
Electrical and electronic old devices
contain a variety of valuable materi-
als, but also hazardous substances
which were required for function and
safety. Incorrect disposal or handling
can be dangerous to your health and
)
2
09/2011