Access Control; Supercode; Change; Default Settings - Comelit 3070/B Mode D'emploi

Exit confi guration (see
page 23).

2. ACCESS CONTROL

2.1. SUPERCODE

The supercode can be used to access the confi guration menu.

2.1.1. CHANGE

PROCEDURE DISPLAY INFO
Access confi guration (see
MAIN
page 23).
ACCESS CONTROL
Select the menu
ACCESS CONTROL
ACCESS CONTROL /
SUPERCODE
SUPERCODE / CHANGE
using the key .
SUPERCODE
CHANGE
Enter the new supercode
value.
SUPERCODE
VALUE: _ _ _ * * *
Press the key
PARAMETER
to confi rm the value
CHANGED
of the parameter.
PASSWORD ALREADY
IN MEMORY
Exit confi guration (see
page 23).
28
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The supercode must be
at least 4 digits long.
If the supercode is 4-5
characters long, it will self-
complete: the fi rst digits
will be zero (e.g.: 001234
/ 012345).
If entry is successful.
or:
If the password has
already been entered.

2.1.2. DEFAULT SETTINGS

PROCEDURE DISPLAY INFO
Access confi guration (see
ACCESS CONTROL
page 23).
SUPERCODE
Select the menu
SUPERCODE
ACCESS CONTROL
DEFAULT SETTINGS
/ SUPERCODE /
DEFAULT SETTINGS
DEFAULT SETTINGS
using the key .
NO
Select the desired value:
DEFAULT SETTINGS
0 = NO
_ _ _ 1
1 = YES
DEFAULT SETTINGS
YES
Press the key
PARAMETER
to confi rm the value
CHANGED
of the parameter.
ERROR
Exit confi guration (see
page 23).

2.2. PASSWORD

The door lock relay on the speaker module can be activated by entering a
password code stored previously (see page 22).
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The current value of the
parameter appears on
screen.
2 sec.
default = 778899
If entry is successful.
or:
If entry does not fall within
the limits.