Navigation Mode; Installing The Module - Comelit 3070/B Mode D'emploi

• Entering the list of users (Download) via connection to PC equipped with
software Art. 1249B (R.I. 003 - SW rev. 2.3 or higher).
• Entering the list of users via connection with the PC can be performed over an
RS232 line or over an RS485 line by means of the interface card
(see system diagram, page 71).
• Reading (Upload) the list of users stored on the directory module via
connection to PC equipped with software Art. 1249B (R.I. 003 - SW rev. 2.3
or higher).
• Option of displaying graphics interface messages in one of 12 available
languages (Italian, English, French, German, Portuguese, Danish, Finnish,
Dutch, Spanish, Swedish, Polish and Norwegian).
• Welcome message management (only available in VIP mode and
programmable via VIP Manager)
• Screensaver (only available in VIP mode and programmable via VIP Manager)
[NOT SIMPLEBUS, NOT SIMPLEBUS TOP]

NAVIGATION MODE

Access to the confi guration stage has been carried out (see page 23).
The menus are scrolled through automatically every 2 seconds.
Press to confi rm the selection. Press
20
Art. 20022618
[NOT SIMPLEBUS, NOT SIMPLEBUS TOP]
DELETE/CANCEL
BACK: exit sub-menu
CALL – DOOR LOCK –
MENU SELECTION
to return to the menu level above.
EXAMPLE: Accessing "language" parameter modifi cation
„ access confi guration mode (see page 23).
MAIN
SETTINGS
SETTINGS
SYSTEM PARAM.
2 sec
SETTINGS
LANGUAGE
A new parameter is entered by scrolling through the possible values using the
number keys.
Press the number corresponding to the desired value (in the example 0 =
1.
Italian).
» after 2 sec. the parameter corresponding to the entered number appears on screen.
2. Press to confi rm the parameter.
Press another number to change your selection.
Press to return to the menu level above.
EXAMPLE: "italiano" selected as language
LANGUAGE LANGUAGE
0
DEFAULT _ _ _ 0
2 sec
LANGUAGE
ITALIANO

INSTALLING THE MODULE

If using module 3070/B with 4680C, see diagrams on page 68.
If using module 3070/B with 4662C, see diagrams on page 69.
If using module 3070/B with 4682C, see diagrams on page 70.
To prevent any interference caused by electrostatic discharges, it is advisable to
screen the casing as shown in the diagram on page 67.
LANGUAGE
DEFAULT
PARAMETER
CHANGED