Language; Default Settings - Comelit 3070/B Mode D'emploi

1.2. LANGUAGE

The value of this parameter is used to set the language in which messages are
displayed.
PROCEDURE DISPLAY INFO
Access confi guration (see
MAIN
page 23).
SETTINGS
Select the menu
SETTINGS
SETTINGS /
LANGUAGE
LANGUAGE using the
key.
LANGUAGE
ENGLISH
Select the operating
language by entering the
corresponding number:
0 = ITALIANO
LANGUAGE
1 = ENGLISH
_ _ _ 0
2 = FRANÇAIS
3 = DEUTSCH
4 = PORTUGUES
5 = DANSK
6 = SUOMI
LANGUAGE
7 = NEDERLANDS
ITALIANO
8 = ESPAÑOL
9 = SVENSKA
10 = POLSKI
11 = NORSK
12 = DEFAULT (Italian)
Press the key PARAMETER
to confi rm the value
CHANGED
of the parameter.
ERROR
Exit confi guration (see
page 23).
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The current value of the
parameter appears on
screen.
EXAMPLE: Setting the
language to English.
N.B. If the LANGUAGE
parameter is set to
DEFAULT, you will
2 sec. be asked to set the
language again at the
next startup.
If entry is successful.
If entry does not fall within
the limits.

1.3. DEFAULT SETTINGS

This procedure restores the factory-set default parameters:
Language = DEFAULT;
System type = SIMPLEBUS;
Call type = STANDARD;
Screensaver = disabled (the Screen Saver function can only be programmed for VIP
systems using VIP Manager);
RS485 address = 0000;
Download type = RS232;
Supercode = 778899;
Welcome message = disabled (the Welcome message function can only be programmed
for VIP systems using VIP Manager);
Static welcome message = disabled (the Welcome message function can only be
programmed for VIP systems using VIP Manager);
Number of directory entries = 0
Number of password entries = 0
This procedure resets the directory and password database
PROCEDURE DISPLAY INFO
Access confi guration (see
MAIN
page 23).
SETTINGS
Select the menu
SETTINGS
SETTINGS / DEFAULT
DEFAULT SETTINGS
SETTINGS using the
key.
Select the desired
DEFAULT SETTINGS
value by entering the
_ _ _ 1
corresponding number:
0 = NO
1 = YES
DEFAULT SETTINGS
YES
Press the key
PLEASE WAIT
to confi rm the value
of the parameter.
PARAMETER
Press to exit the menu.
CHANGED
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The current value of the
parameter appears on
screen.
2 sec.
If entry is successful.
27