Using The Digital Module; Calling A User; Ending A Call/Conversation; Opening The Door By Entering The Password Code - Comelit 3070/B Mode D'emploi

USING THE DIGITAL MODULE

CALLING A USER

INITIAL CONDITION
Module powered up
in standby.
PROCEDURE DISPLAY INFO
Enter code using
the numeric keypad
on module Art. 3070/B.
PRESS
Press the key
to call.
PLEASE WAIT
If the call
was successful you
will see:
CALL
EFFECTED
If the call was not
successful you will see:
CALL
FAILED
Or if the riser
is busy you will see:
BUSY
USER
If the call
is successful and the user
answers you will see:
COMMUNICATING...
22
DESCRIPTION
EXAMPLE: calling
_ _ 1
a user with code 1.
TO CALL

ENDING A CALL/CONVERSATION

INITIAL CONDITION
CALL
EFFECTED
COMMUNICATING...
PROCEDURE DISPLAY INFO
Press the key.
COMMUNICATION

OPENING THE DOOR BY ENTERING THE PASSWORD CODE

INITIAL CONDITION
ENTER
USER CODE
PROCEDURE DISPLAY INFO
Press the key.
PASSWORD: _ _ _ _ _ _
CONFIRM WITH
Enter the
password code. (min. 4
PASSWORD: _ _ * * * *
characters)
CONFIRM WITH
Press to confi rm.
DOOR
OPEN
or:
WRONG
PASSWORD
Call effected.
Conversation in progress.
DESCRIPTION
END OF
Standby
DESCRIPTION
To cancel the procedure
press the key.
If the password is 4-5
characters long, it will self-
complete: the fi rst digits
will be zero (e.g.: 001234
/ 012345).
If the password code is
already in the memory.
The contact on the
speaker module will be
activated.
If the password code
does not exist in the
memory.