Call Mode; Simplebus - Standard Call Mode (Default); Simplebus - Indirect Code Call Mode; Simplebus Top Call Mode - Comelit 3070/B Mode D'emploi

1.1.3. CALL MODE

There are 5 call management modes to choose from:
• Standard Simplebus (default),
• Simplebus Indirect code,
• Simplebus Top,
• Simplebus Top Indirect code,
• VIP
A. SIMPLEBUS - STANDARD call mode (default)
In this operating mode, the door-entry phone user is identifi ed by a Code
fi eld no longer than 3 digits (between 1 and 240).
The call is made as follows:
On the keypad, enter the code 1
1.
2. press the key
» transmit the call to the user identifi ed with the code 1
B. SIMPLEBUS - INDIRECT CODE call mode
In this operating mode, the door-entry phone user is identifi ed by an
Indirect Code fi eld no longer than 6 digits and a Code fi eld no longer than
3 digits (between 1 and 240).
EXAMPLE
User identifi ed by Code = 1 and Indirect Code = 1000
The call is made as follows:
1. On the keypad, enter the code 1000
press the key
2.
» transmit the call to the user identifi ed with the code 1
C. SIMPLEBUS TOP call mode
In this operating mode, the door-entry phone user is identifi ed by a 2-part
Code fi eld; a zone fi eld with up to 3 digits between 1 and 500) and a user
fi eld which must have 3 digits (between 1 and 240).
The call is made as follows:
On the keypad, enter the code 25 015
1.
press the key
2.
» call transmitted to the user identifi ed with the code 25 015
D. SIMPLEBUS TOP – INDIRECT CODE call mode
In this operating mode, the door-entry phone user is identifi ed by an
Indirect Code fi eld no longer than 6 digits and a 2-part Code fi eld; a zone
fi eld with up to 3 digits between 1 and 500) and a user fi eld which must
have 3 digits (between 1 and 240).
EXAMPLE
User identifi ed by Code = 25 015 and Indirect Code = 1000
The call is made as follows:
On the keypad, enter the code 1000
1.
press the key
2.
» call transmitted to the user identifi ed with the code 25 015
E. VIP call mode
In this operating mode the door-entry phone user is identifi ed with a
VIP address (max. 8 digits; for code self-completion please refer to the
technical manual for VIP Manager software 1449).
Address entry on the speaker is managed using VIP Manager software
1449.
The call is made as follows:
On the keypad, enter the code 56
1.
press the key
2.
» transmit the call to the user identifi ed with the code 56
PROCEDURE DISPLAY INFO
Access confi guration (see
MAIN
page 23).
SETTINGS
Select the menu
SETTINGS /
SETTINGS
SYSTEM PARAM. /
SYSTEM PARAM.
CALL MODE using the
SYSTEM PARAM.
key.
CALL MODE
CALL MODE
SIMPLEBUS
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The current value of
the parameter appears
on screen (Simplebus,
Simplebus Top, VIP).
25