Resetting The Headset - Sony Ericsson HBH-30 Manuel

To pair the headset with a Sony Ericsson or
Ericsson phone
1. With the headset turned off, press and hold
up to 10 seconds until the indicator light on the headset
flashes green and red.
2. In the phone, scroll to Extras or Connect,
YES , Paired devices,
initiates, .
YES
3. A list of device types that you can pair with your phone
appears. Scroll to Headset and press
that the phone and the headset are not too far apart.
4. HBH-30 appears in the display. Press
5. Enter the headset passkey (0000) and press
phone pairing procedure starts.
6. You may now replace the given headset name with a
personal name tag and then press
been completed, the headset indicator light flashes green.

Resetting the headset

You may want to reset the headset to its default
settings. This also clears all current pairings.
8 Preparing the headset
, Bluetooth,
YES
YES , Add device, YES , Phone
. Make sure
YES
.
YES
. When pairing has
YES
To reset the headset
1. With the headset turned off, press and hold
for up to 10 seconds until the indicator light on the headset
flashes green and red. Then release the button.
2. Press and hold
followed a moment later by another two beeps. The
headset is now turned off. Keep the headset off for at
least 30 seconds. The headset has now been reset.
Right or left ear
If you want to wear the headset on your left ear, you
have to change the orientation of the ear hook.
. The
YES
To adjust the ear hook for left-ear use:
• Turn the hook 180 degrees.
again until you hear two beeps,
for