To disconnect the charger
• Tilt the charger plug downwards to remove it.
Instructions
Instructions in this user's guide are based on headset
buttons and phone keys. For example, the
or the
key on the phone can be used to answer a call.
YES
To turn the headset on
• Press and hold
followed by a short high tone.
The headset indicator light flashes green. If the battery
is low, the light flashes red.
Note: The first time the headset is turned on, it will
automatically be ready for pairing.
until you hear a short low tone
To turn the headset off
• Press and hold
followed by a short low tone. The headset indicator
light is switched off.
Pairing the headset
Before you can use your headset, you must pair it with
the device you want to use it with, for example, a mobile
phone. Once you have paired your headset with the
phone, you do not need to pair it again until you want
to use it with another phone.
General pairing instructions
You pair the headset with the phone by adding it to a
list of paired devices in the phone. They then recognize
each other when they connect.
button
To pair the headset (general instructions)
1. Prepare your phone according to the phone's user
documentation on pairing.
2. Press
light on the headset flashes green and red. The headset
is now ready for pairing.
3. Continue according to the instructions in the phone's
user documentation. The headset passkey is 0000.
until you hear a short high tone
for up to 10 seconds until the indicator
Preparing the headset
7