Technical Data - gourmetmaxx XJ-2K960S Mode D'emploi

Masquer les pouces Voir aussi pour XJ-2K960S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The frying container
overfl ows.
Unpleasant odours
occur.
The food to be
cooked does not go
brown and crispy.

Technical Data

Model:
Article No.:
Voltage supply:
Power:
Temperature range:
Frying container volume:
Protection class:
Possible cause / solution
The MAX marking in the frying container was exceeded. Remove
excess oil / fat.
The frying basket is overfi lled. Reduce the quantity of food!
The food for cooking is moist or contains too much water (for
example frozen food). Remove the ice and dry the food for cook-
ing before you lower the frying basket very slowly.
Mixture of different oils / fats. Dispose of the fat and then fi ll the
frying container with one single type of fat.
The oil / fat is no longer fresh. Replace the frying bath (after no
more than 12 cycles).
The fat is unsuitable. Use vegetable fat to achieve a good frying
quality.
The frying basket is overfi lled. Reduce the quantity of food!
The food for cooking is moist or contains too much water (for
example frozen food). Remove the ice and dry the food for cook-
ing before you lower the frying basket very slowly.
Pieces of food are too thick or contain too much water. Try a long-
er cooking time. Cut the food to be cooked into smaller pieces.
Too great a quantity was deep-fried in one go and the frying bath
is not hot enough. Wait until the control lamp goes out. Only ever
deep-fry small quantities of the food to be cooked (particularly
with frozen food).
The temperature of the frying bath may be too low. Set the tem-
perature controller to a higher temperature.
XJ-2K960S
Z 02900
220 – 240 V~ 50 Hz
840 W
up to max. 190 °C
approx. 500 ml up to the MIN marking
approx. 900 ml up to the MAX marking
I
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 02900

Table des Matières