Propeller Installation; Loading Hatch - Staufenbiel WE CAN FLY 0314303 Instructions De Montage

EN
Install the spinner backplate on the the collet and the propeller. Install the washer and the nut and
fasten it with a 10 wrench.
Install the spinner and fasten it with two 2,5 x 8mm srews.
18
20
Connect the servo of the loading hatch on a free receiver port. Assign and programm a switch.
Check the function. The loading hatch must open and close without binding.
22
18

PROPELLER INSTALLATION

19
21

LOADING HATCH

23