Notes On Operation And Troubleshooting - Boneco W400 Instructions D'utilisation

NOTES ON OPERATION AND TROUBLESHOOTING

Problem
Air has an unpleasant odor
AUTO LED on the appliance flashes red
Appliance cannot be operated in the app. The mes-
sage "Searching ..." "Cannot be found" appears
AUTO LED pulses
Status LED flashes if operation is attempted
Display remains dark
Possible cause
Stagnant water in the water base
The water base is empty
Appliance is blocked by another smartphone
The desired humidity has been reached or exceeded
Operation is blocked
The brightness of the LEDs has been heavily reduced in
the app
Action
Drain the water base and clean the appliance and the AW200 evaporator mat
Fill the water base
Close the app on the second smartphone
None needed
Disable the LOCK function in the app
Increase the brightness of the LEDs in the app
43
en