TYLOHELO Elite Mode D'emploi page 53

System type
The system type settings control the maximum session times and temperatures. These are
determined by various rules that apply to sauna and steam in the various regions. For saunas
in the EU and Other regions, the options are Private, Timer-controlled and Monitored. For both
saunas and steam in North America, the options are Private and Public.
For saunas in the EU and Other regions, the following rules apply:
Private: Maximum session time 6 hours and maximum temperature 110 °C. A door switch is
required in order to use calendar programs, external switches, phone apps and PC applica-
tions in the EU region.
Timer-controlled: Maximum session time 12 hours and maximum temperature 110 °C. After
twelve hours of operation, six hours of breaks are required. A door switch is required in order
to use calendar programs, external switches, phone apps and PC applications in the EU regi-
on.
Monitored: Maximum session time 24 hours and maximum temperature 110 °C. The sauna
must be monitored. Use of calendar programs, external switches, phone apps and PC applica-
tions is not permitted in the EU region.
For saunas in the USA region, the following rules apply:
Private: Maximum session time 1 hour and maximum temperature 90 °C. No requirement
regarding door switch.
Public: Maximum session time 24 hours and maximum temperature 90 °C. No requirement
regarding door switch.
For steam in the USA region, the following rules apply:
Private: Maximum session time 1 hour and maximum temperature 125 °F. No requirement
regarding door switch.
Public: Maximum session time 24 hours and maximum temperature 125 °F. No requirement
regarding door switch.
There is no setting for system type in EU and Other regions. In these areas the maximum
session time is 24 hours and the maximum temperature is 55 °C.
Software update
This should only be used by Tylö service personnel. Protected by PIN.
To perform an update, special equipment and a special program are needed.
Factory reset
You can reset the control panel and device to the settings that applied before first
installation via this menu. This option is protected by a PIN, and confirmation of the
reset is required. All changes to settings, favourites, calendar programs, etc. will be
deleted.
If the circuit board or operating panel are replaced, a factory reset should be performed.