TYLOHELO Elite Mode D'emploi page 46

Configure: System settings (continued).
PIN
With the above settings (access to On/Off, Temperature, Humidity and Lighting, but
not to Fragrance 1), the Home and Settings screens will look like the pictures on the
left. Note that the Favourites, Calendar programs and Configure buttons have disap-
peared and are replaced by the padlock button.
To unlock the panel, press the padlock and enter your PIN.
If you forget your pin, the universal reset code is 1995. If this is used, the PIN is restored to the original
default of 0000.
The PIN is also used when connecting to the control panel from a phone app or a PC app.
Standby with locked panel
When the panel is locked via PIN and is started in Standby (manually or via a calen-
dar program), a "Start" button appears at the top of the screen. If "Start" is pressed, the
button changes to "Restart Bathtime" and the sauna quickly heats up to the defined
temperature.
Pressing the Start button starts a session with the bath time defined in "Configure/External switch/
bath time". If the session time runs out before the Standby session is finished it is resumed. If it ends
after the Standby session, the device switches off.
Pressing the "Restart Bathtime" button starts a new session with the operating time defined in "Bath-
time external switch".