Start/Stop Switch Panel; All Start/Stop Switch Panel; Power Trim And Tilt Switch On Digital Electronic Control - Yamaha F150 Manuel De L'utilisateur

With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
ON
OFF
ON
OFF
EMU41622

Start/Stop switch panel

The engine can be started or turned off by
pressing the Start/Stop button. For twin type,
it is possible to start or turn off individual en-
gine. The indicator for the corresponding en-
gine will come on.
 PORT:Port side engine
 STBD:Starboard side engine
" (start) po-
" (on) position.
START
ZMU07145
ZMU07146
1
2
1. Indicator
2. Start/Stop button
EMU41632

All Start/Stop switch panel

The Start/Stop button allows all engines to
start or turn off.
1
1. All Start/Stop button
EMU35154
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch " " (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 68 and 69.
Components
ZMU07174
ZMU07176
" (up) trims the
33