Identification Of The Machine; Make And Model Designation; General Description; Client Assistance - Astoria AL Manuel D'utilisation Et D'entretien

2.

IDENTIFICATION OF THE MACHINE

Make and model designation

2.1
The identification and the model of the
machine are found on the NAMEPLATE and
in the EC DECLARATION OF CONFORMITY
provided with the machine.
Below are some of the machine identi-
fication data.

General description

2.2
The machine object of this Manual
consists of mechanical, electrical, and
electronic components whose combined
action allows to make milk, coffee and
water-based beverages.
This product is manufactured in compli-
ance with EU Directives, Regulations and
Standards indicated in the EC DECLARA-
TION OF CONFORMITY provided with the
machine.
This machine is designed and construct-
ed to operate only after being properly
connected to a hydraulic and electrical
network and placed so as to be sheltered
from atmospheric agents.

Client Assistance

2.3
ASTORIA MACCHINE PER CAFFÈ S.R.L. ASTORIA MACCHINE PER CAFFÈ S.R.L.
Via Condotti Bardini, 1 - 31058 SUSEGANA (TV) - ITALY Via Condotti Bardini, 1 - 31058 SUSEGANA (TV) - ITALY
Tel. +39.0438.6615 - Fax +39.0438.60657 Tel. +39.0438.6615 - Fax +39.0438.60657
E-mail: info@astoria.com - Web-site: www.astoria.com E-mail: service@astoria.com - Web-site: www.astoria.com
USER manual

Intended use

2.4
The espresso coffee machine has been
designed to professionally prepare hot
drinks such as tea, cappuccinos and weak,
strong and espresso coffees, etc.
The appliance is not intended for do-
mestic use, it is intended for professional
purposes only.
The machine can be used in all the con-
ditions laid down, contained or described
in this document; any other conditions
must be considered dangerous.
The machine must be installed in a
place where its access is restricted to
qualified personnel only who have re-
ceived suitable training (coffee shops,
restaurants, etc.).
47 260
of