Cleaning The Condenser; Removal From Service/Winterization - Koolaire K Série Mode D'emploi

Section 4

Cleaning the Condenser

n
Disconnect electric power to the ice
machine head section and the remote
condensing unit at the electric service
switches before cleaning the condenser.
A dirty condenser restricts airflow, resulting
in excessively high operating temperatures.
This reduces ice production and shortens
component life.
• Clean the condenser at least every six
months.
n
The condenser fins are sharp. Use care
when cleaning them.
• Shine a flashlight through the condenser
to check for dirt between the fins.
• Blow compressed air or rinse with water
from the inside out (opposite direction
of airflow).
• If dirt still remains call a service agent to
clean the condenser.
Part Number: 000014142 Rev 02 5/17
Warning
Warning

Removal from Service/Winterization

1. Clean and sanitize the ice machine.
2. Move the toggle switch to the OFF
position and turn off the ice machine.
3. Turn off the water supply, disconnect
and drain the incoming ice-making
water line at the rear of the ice
machine and drain the water trough.
4. Energize the ice machine, wait one
minute for the water inlet valve to
open and blow compressed air in both
the incoming water and the drain
openings in the rear of the ice machine
to remove all water.
5. Move the toggle switch to the OFF
position and turn off the ice machine.
Disconnect the electric power at the
circuit breaker or the electric service
switch.
6. Fill spray bottle with sanitizer/water
solution and spray all interior food
zone surfaces. Do not rinse and allow
to air dry.
7. Replace all panels.
Maintenance
35