Maintenance
EXTERIOR CLEANING
Clean the area around the ice machine as
often as necessary to maintain cleanliness
and efficient operation.
Wipe surfaces with a damp cloth rinsed
in water to remove dust and dirt from the
outside of the ice machine. If a greasy
residue persists, use a damp cloth rinsed in
a mild dish soap and water solution. Wipe
dry with a clean, soft cloth.
The exterior panels have a clear coating
that is stain resistant and easy to clean.
Products containing abrasives will damage
the coating and scratch the panels.
• Never use steel wool or abrasive pads for
cleaning.
• Never use chlorinated, citrus-based or
abrasive cleaners on exterior panels and
plastic trim pieces.
30
Cleaning/Sanitizing Procedure
,
Use only approved Ice Machine Cleaner
and
Sanitizer
(Manitowoc Cleaner part number 9405463
and Manitowoc Sanitizer part number
9405653). It is a violation of Federal
law to use these solutions in a manner
inconsistent with their labeling. Read and
understand all labels printed on bottles
before use.
,
Do not mix Cleaner and Sanitizer solutions
together. It is a violation of Federal
law to use these solutions in a manner
inconsistent with their labeling.
n
Wear rubber gloves and safety goggles
(and/or face shield) when handling Ice
Machine Cleaner or Sanitizer.
Ice machine cleaner is used to remove lime
scale and mineral deposits. Ice machine
sanitizer disinfects and removes algae and
slime.
Part Number: 000014142 Rev 02 5/17
Section 4
Caution
for
this
application
Caution
Warning