Elite QUB0 Mode D'emploi page 15

• Push the bicycle towards the resistance unit
until the rear wheel touches the roller (Fig. 19).
• Verify the stability of the bike by pushing and
pulling the horizontal tube of the frame and the
saddle. Should the bike still not appear stable,
make sure its quick release and lever are correct-
ly positioned, that the lever (F) is in a "closed"
position and the adjusting of the clamping system
has been carried out correctly.
BIKE REMOVAL
• Hold the bicycle with one hand and with the
other open the lever (F), turning it to the "open"
position (Fig. 20). Remove the bicycle.
F
• For carrying, or storage, it is advisable to close
the stand. (Fig.21 e Fig.22).
19
• In order to further reduce the storage footprint
remove the unit (B) from the frame (A) and place it
back in its original packaging and fold the frame
as indicated in Fig. 23 and Fig. 24.
20
EN
21
22
23
15