Elite QUB0 Mode D'emploi page 14

EN
• If the lever (F) starts pressing the quick release
in the delayed work position (Fig. 13), unscrew the
left bushing pin (G) (Fig. 14) so that the lever
starts working inside the predefined work area
(between 55° and 65°). (Fig. 10).
• If the bicycle wheel sets up too far from the
centre of the roller (Fig. 15), loosen the resistance
unit (B) attachment bolts (D), slide the resistance
14
G
G
unit left or right as necessary, and re-tighten the
bolts (Fig.16, Fig.17 and Fig.18).
12
13
14
15
16
17
18