Use Of Adapters - VWR Compact Star CS4 Manuel D'instruction

Use of tube adapters:
- Centrifuging 7ml tubes (13 x 100mm)
or any tube with a diameter of less than 14mm and
a height above 90mm. (Figure A.)
- Configure combination adapter so that
the single line mark lines up with
the double line mark.
- Place the adapter in the rotor shield
with the hollow side up
(per figure A.)
- Centrifuging 5ml tubes (12 x 75mm)
or any tubes with a diameter less than 14 and
a height below 90mm.
- Take the larger half of the combination
adapter and place it in the rotor
shield with the double line mark up
and the single line mark down
(per figure B.)