ProKlima FN-114791.1 Mode D'emploi page 53

FN-114791.1& FN-114791.2
PARTS DESCRIPTION
1. Main body (Fan guard + Fan blade)
2. Stand base
3. Circular bracket
4. Speed switch
5. Swing button
ASSEMBLY INSTRUCTIONS
** Please assemble correctly by the following order when using.
Assemble the stand base.

Attach the right and left support brackets (1) together, and fix them by screw (2), washer (3) and nut (4). (Fig.1)
Assemble the fan head to the stand base.

Find the screw hole in the left side of the circular bracket. Fix the circular bracket and the left support bracket
by long screw (5), U-type stator (6), article shockproof (7) and nut (8). You can twist the nut easily using the
nut holder (9). Please follow the installation order in Fig.2.
Assemble the right side in the same order.
Fig. 1
Fig. 2
OPERATION
1. Plug the power cord into a suitable socket.
2. The fan is switched on by using the speed buttons on the control box: OFF = off, LOW = Low speed, MED =
Medium speed, HIGH = High speed.
3. SWING: Press this button to control the oscillation function on and off.
4. Tilting Angles: turn off the fan, then push or pull the circular bracket to adjust the angle of airflow.
- 52 -
GB