Honda Miimo HRM40 Guide D'installation page 20

Map & Mow Intelligent Cutting – How your Miimo cuts efficiently
6.7
Your Miimo is ready to start cutting the lawn in sections of parallel lines, as soon as the lawn has been mapped and
obstacles have been identified. This ensures an efficient mowing session. The Miimo knows the size of your lawn, where
it needs to cut, where grass has already been cut, as well as the way back to the docking station to recharge.
In order to leave a beautiful lawn, and to reach difficult areas, your Miimo will change the direction of the lanes every
time that it has finished a full cut of your lawn. So the next time it starts again, it will start in a different direction, but
always keeping the parallel lanes and its efficiency.
Note: allow the mower to run for 3 full cuts to cover the whole lawn area.
Cutting lawn area without docking station (Type B):
1. With the mower in the docking station, select Settings, Mowing mode and Mow without dock.
2. Enter PIN
3. Carry the fully charged Miimo to the additional area and place it on the lawn.
4. Press the key. The mower will operate in a random mowing pattern using this mode.
5. The Miimo will mow until it runs out of battery, displaying "Done, place in dock" . Battery run time will vary depending
on your model and lawn conditions. Please see the manual for more details.
6. Return your Miimo to the docking station.
Your Miimo will continue its calendar/schedule as normal (if you have set this up), once it has recharged.
20