Honda Miimo HRM40 Guide D'installation page 14

Obstacle /
Object Typ
Corners
Between 2 pegs
Between 2 pegs in a
corner or when wiring
out obstacles
Slope on the perimeter
wire
Start laying the perimeter wire
5.1
from the docking station in
an anti-clock wise direction.
Pull the wire from the coil. Tauten and fix it with one peg next to the
docking station.
Ensure the wire is straight and in line with the cable duct underneath
the docking station for 1.5 m.
If the wire is not straight and in line with the docking station, the
Miimo will not work and you will need to re-lay the wire.
14
Needed
Why
space
> 45° Your Miimo needs space to turn.
A loose wire might be cut or become a trip
hazard. Therefore, ensure the wire is taut.
75 cm
If you can place two fingers under the wire,
it is not taut enough.
Increase the number of pegs at any corner
< 30 cm to ensure the perimeter wire stays in
place.
When the mower is moving down the
< 15% slope there is risk of driving over the
perimeter wire.
Example
> 15% < 15%