Festo HSP- -AP Série Notice D'utilisation page 42

HSP−...−AP/A S
Fitting an external drive for type HSP−...−AS:
Please note
S Use a drive with constant drive speed
without impact loading.
S Make sure that you observe the maxi
mum permitted values of the following
variables:
axial radial force F
drive speed M
The reference point for forces and
torques is the centre of the shaft.
See chapter Technical specifications."
The drive speed is transmitted via a drive shaft with ball bearings. The external
drive can be fastened to the rear of the sub−base.
Fastening the drive
(A) Fastening holes (4x)
(B) Shaft with feather key
as per DIN 6885
(C) Centring fit
42
and F
y z
y
HSP−12−AS
M4
A2x2x12
@ 45
(A)
(B)
(C)
Fig. 12
HSP−16−AS
M4
A2x3x18
@ 60
f8 f8
Festo HSP−...−AP/AS 0508a English
HSP−25−AS
M5
A2x4x25
@ 70
f8