Festo HSP- -AP Série Notice D'utilisation page 52

HSP−...−AP/A S
Check the cushioning elements and spring clamping elements (type designa
S
tion see Accessories") for the following signs of wear:
Test
Test cycle
Sign of wear
Replacement cycle
1)
At 0.5 Hz in dual operation mode.
2
) The rubber buffers in the fixed stops are only to reduce noise.
Check to see if more frequent tests are required. This may be the case with:
S
higher temperatures
excessive dirt
solvent liquids or fumes.
Please note
If the load changes, repeat the test taking the modified work load into
consideration.
End position adjustment (chapter Fitting")
Setting the positioning speed (chapter Commissioning")
Please note
HSP−...−A S with an electromotor:
Moving to the fixed stop ( 2 in fig. 1) generates sudden loadings in the drive
chain. This can lead e.g. to gear damage.
S Move to the fixed stops only with low energy or use a drive chain which can
withstand sudden loadings. The rubber buffers in the fixed stops are only to
reduce noise.
52
Spring clamping
element 1
Every 2 million strokes (approx. every 2 months)
Play of the vertical
guide rail in the end
positions in a
horizontal direction
After 5 million cycles
Shock absorber 2
(...−AP)
Oil leakage; hard
knocking; stop plunger
remains in the
retracted end position
or moves away from it
only hesitantly.
Every 10 million strokes (approx 1 year)
Festo HSP−...−AP/AS 0508a English
Rubber buffer 2
(...−AS)
1)
2)
Hard knocking
1)