Festo HSP- -AP Série Notice D'utilisation page 37

HSP−...−AP/A S
5 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the specifications in this chapter are always observed.
The product will then function correctly and safely.
Please comply with national and local
S
safety laws and regulations.
Please observe the prevailing ambient
S
conditions.
Compare the maximum values in these
S
operating instructions with your actual
application (e.g. pressures, forces,
torques, temperatures, masses, speeds).
Remove the packaging. The packaging is
S
intended for recycling. (exception: oiled
paper which must be disposed of ).
Please observe the warnings and instructions:
S
on the product
in these operating instructions and
for the type HSP−...−...WR/WL: in the operating instruction for the
BWR−/BWL−HSP−...
Use the product in its original state. Unauthorized modification is not per
S
mitted.
Make sure there is a supply of correctly
S
prepared compressed air.
Maintain the selected medium for the
S
complete service life of the product.
Example: If non−lubricated compressed
air is used at the beginning, you should
always use non−lubricated compressed
air.
Festo HSP−...−AP/AS 0508a English
[°C] [%]
Fig. 4
LF−... LR−...
Fig. 5
[mbar]
37