Understanding The Control Board - Pit Boss 700T1 Mode D'emploi

UNDERSTANDING THE CONTROL BOARD

GRILL
P TEMP
300
250
350
225
200
14
CONTROL
˚F
400
450
475
GRILL
P TEMP
DESCRIPTION
The Temperature Control Dial allows you to set your
desired smoking temperature. Rotate the knob to select
from Smoke, any of the eight temperature presets, or High.
The OFF Setting on the Temperature Control Dial is the off
mode for the unit. The unit will not function on this setting.
The SMOKE Setting on the Temperature Control Dial is the
start-up mode for the unit. The grill operates at the lowest
temperature, without the fire going out.
The HIGH Setting on the Temperature Control Dial is the
highest heat level for the unit. The grill operates at the
highest temperature. When the lid is open, the grill will run
at this speed to compensate for the loss of heat in the barrel.
The LCD Screen is used as the information center for your
˚F
unit. The LCD screen will display the current grill temperature
(GRILL) and meat probe temperature (P TEMP). The LCD screen
is displayed in 5 degree (˚F) increments. See Troubleshooting
for more information on error codes.
READOUT DESCRIPTION
888 Displays once connected to AC power.
Flashing • • • Indicates the igniter is on.
P TEMP Indicates the meat probe temperature.
˚
Er1 Temperature probe wire not connecting.
ErP Power interruption while in operation.
The plug-in connection port on the front of the Control
Board is for a Meat Probe. When a meat probe is connected,
the temperature is displayed on the LCD Screen. When the
meat probe is not in use, disconnect the adapter from the
connection port.