Installation Instructions - Festo ASI−EVA 2E2A−Z Série Manuel D'installation

3

Installation instructions

3.1 Fitting
The AS−Interface single valve module can be fitted in one
of the following ways:
Hat rail fitting on support rail EN 50022 35x15 with
adapter kit type CP−TS−HS35
ITEM profile 40 mm
Wand fitting, fitting on cylinder grooves:
1
1
Fitting onto a hat rail
2
Dimensions of the fastening holes (in mm)
18
3 bores for M4 screws
Longitudinal holes for variable fastening to the cylin
der grooves
2
Festo ASI−EVA−...−2E..A−Z 0401b English