Festo ASI−EVA 2E2A−Z Série Manuel D'installation page 21

3.5 Connecting the valves (outputs)
Depending on design, the AS−Interface single valve con
nector possesses 1 or 2 connecting cables for the outputs/
valves (type 2E1A−Z or ...−2E2A−Z).
Valve coils with a power consumption greater than 1 Watt
may only be operated with additional supply.
Variants
ASI−EVA ...
... MF−2E..A−Z
... MEB−2E..A−Z
... MZB9−2E..A−Z
... K1−2E..A−Z
The AS−Interface has an integrated watchdog function
which resets the outputs in the event of failure of the bus
communication.
Festo ASI−EVA−...−2E..A−Z 0401b English
Connection to valves
All valves from Festo with F−coil, e.g.
ISO sizes 1 to 3, NAMUR, Tiger
Classic, Tiger 2000, start−up valve
type MFHE, Cassette Classic, direct−
controlled valves type MFH−...
CPE18−...−B, CPE24−...−B, ISO sizes 1
to 3, VDMA sizes 1 or 2, MIDI
CPE10−...−B, CPE14−...−B, CPE10−SC
Any outputs/valves, max. current con
sumption see technical specifications.
Cable assignment:
Black 1/2 = 24 V / 0 V
green/yellow = n.c.
Length
0.5 m
0.5 m
0.5 m
1 m
21