Inserting And Removing The Battery - brennenstuhl professional LINE LA 4000 Mode D'emploi

Projecteur led smd rechargeable
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
ILLUSTRATED COMPONENTS

INSERTING AND REMOVING THE BATTERY

The rechargeable battery light is intended for use with the following batteries:
brennenstuhl
professionalLINE AB 1805 battery
®
BOSCH battery GBA 18 V x,x Ah (up to max. 6.0Ah) Professional
Depending on the version, a battery is included in the delivery or can be purchased separately.
The battery can be quickly and easily installed. Open the two locks
Insert the charged battery
position (last of the two locking positions). To remove the battery, press the battery unlock button
the battery upward and out of the battery compartment.
The emitter may only be used if the battery cover is properly locked! Remove the batteries from the unit in the
event of longer periods of disuse!
SWITCHING THE LAMP EMITTER ON/OFF
Press the button
to switch the emitter on. The emitter will then be lit at 50% brightness. To switch to
F
maximum brightness (100%), press the
the lamp extends in comparison to the 100% setting as it consumes less energy. Press the
turn the lamp off.
If the battery is nearly empty, the LED emitter will blink 5 times. The emitter will then remain on for approx.
10 minutes at 50% brightness, until the deep discharge protection switches the emitter off.
This provides sufficient time to replace the battery or stop working.
After the rechargeable battery light automatically shuts off, do not keep pressing the on/off switch.
The battery may be damaged.
8
www.brennenstuhl.com
011016 BA_proLINE Akku SMD-LED Strahler 40 W (Aurolite).indd 8
into the battery compartment
C
button again. Please note: When selecting 50%, the service life of
F
A Battery cover locks
B Battery cover
C Battery*
D Battery compartment
E Battery unlock button*
F On/off button
G Emitter head
H Locking screw
I Suspension device
* Illustrated or described accessories may not
be included in the standard delivery.
You can find all of the accessories in our
accessories program.
and fold the battery cover
A
from above until you feel it lock into the end
D
down.
B
and pull
E
button again to
F
20.06.17 13:02

Publicité

Table des Matières
loading

Table des Matières