Machine Features; Intended Use - Festool IMPACT TI 15 Notice D'utilisation D'origine

Masquer les pouces Voir aussi pour IMPACT TI 15:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
TI 15
GB
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging, intermittent (NiCd, NiMH)
Charging times for BP, BPS and BPC battery packs
Li-ion 1,5 Ah, 80 %/100 %
Li-ion 3,0 Ah, 80 %/100 %
Li-ion 4,2 Ah, 80 %/100 %
Permitted operating temperature range
Temperature monitoring
Safety class
Battery pack
Voltage
Capacity
Weight
4

Machine features

[1-1]
Bit store
[1-2]
On/Off switch
[1-3]
Right/left switch
[1-4]
LED lamp
[1-5]
CENTROTEC tool chuck
[1-6]
Thumbwheel Speed/Impact rate
[1-7]
Capacity display
[1-8]
Battery pack
[1-9]
Belt clip
[1-10]
Buttons for releasing the battery pack
[1-11]
Adapter for FastFix attachments
[1-12]
13 mm chuck
[1-13]
Elbow adapter
[3-1]
Charger
[3-2]
LED-Display
[3-3]
Cable holder
[3B]
Wall mount
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
14
5

Intended use

Cordless impact screw driver is suitable
– for tightening screw fittings and screwing in
screws up to the maximum dimension range
stated
– drilling into metal, wood, plastics and similar
materials
– use with Festool batteries BPC and BPS of the
same voltage.
The device must not be used for applications which
require a precise/specific torque. When using the
device for applications which require a specific
torque or for which a maximum torque must not be
exceeded, there is the risk of overspeeding or dam-
age to the screw or the workpiece.
Charger TCL 3 suitable for
– charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised automat-
ically.)
– indoor use only.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
6
Operation
6.1
Charger cable holder[3-3]
Unwind the cable completely from the recess
before using the charger.
TCL 3
220 - 240 V ~
50/60 Hz
10,8 - 18 V=
max. 3 A
approx. 0,06 A
approx. 25/35 min.
approx. 55/70 min.
approx. 70/90 min.
-5 °C to + 45 °C
via NTC resistor
/II
BPC 15 Li
14,4 V
4,2 Ah
0,58 kg

Publicité

Table des Matières
loading

Table des Matières