Allen-Bradley MicroLogix 1200 Notice D'installation page 18

18 MicroLogix™ 1200 Programmable Controllers
Description
Agency • UL 508
Certification • C-UL under CSA C22.2 no. 142
• Class I, Div. 2, Groups A, B, C, D
• CE compliant for all applicable directives
Electrical/EMC The controller has passed testing at the following levels:
IEC1000-4-2: 4 kV contact, 8 kV air, 4 kV indirect
IEC1000-4-3: 10V/m, 80 to 1000 MHz, 80% amplitude modulation, +900
MHz keyed carrier
IEC1000-4-4: 2 kV, 5 kHz; communications cable: 1 kV, 5 kHz
IEC1000-4-5: communications cable 1 kV galvanic gun
I/O: 2 kV CM (common mode), 1 kV DM (differential mode),
Power Supply: 4 kV CM (common mode), 2 kV DM (differential mode)
IEC1000-4-6: 10V, communications cable 3V
Terminal Screw 0.791 Nm (7 in-lb) rated
Torque
Input Specifications
Description
On-State Voltage
Range
Off-State Voltage
Range
Operating Frequency 47 Hz to 63 Hz
On-State Current:
Off-State Leakage
Current
Nominal Impedance 12K ohms at 50 Hz
Inrush Current (max.)
at 120V ac
1762-IN006A-ML-P
1762-L24AWA 1762-L24BWA
(UL 1604, C-UL under CSA C22.2 no. 213)
1762-L24AWA
1762-L40AWA
79 to 132V ac
0 to 20V ac
•
5.0 mA at
79V dc (min.)
•
12 mA at 120V dc
(nom.)
•
6.0 mA at
132V dc (max.)
2.5 mA max.
10K ohms at 60 Hz
250 mA
1762-L40AWA
1762-L24BWA and 1762-L40BWA
Inputs 0 through 3
14 to 26.4V dc at 55°C
(131°F)
14 to 30.0V dc at 30°C
(86°F)
0 to 5V dc
0 Hz to 20 kHz
•
2.5 mA at 14V dc
(min.)
•
8.8 mA at 24V dc
(nom.)
•
12.0 mA at 30V dc
(max.)
1.5 mA min.
2.5K ohms
Not Applicable
1762-L40BWA
Inputs 4 and higher
10 to 26.4V dc at 55°C
(131°F)
10 to 30.0V dc at 30°C
(86°F)
0 Hz to 1 kHz
(scan time dependent)
•
2.0 mA at 10V dc
(min.)
•
8.5 mA at 24V dc
(nom.)
•
12.0 mA at 30V dc
(max.)
2.6K ohms