Patek Philippe CALIBER CH 29-535 PS Q Mode D'emploi page 16

The adjustments and corrections must be per-
16
formed strictly in the order described below:
1. setting
and the month
To simultaneously correct these two displays,
actuate the push piece between 12 and 1 o'clock
as often as necessary to display the current
year (4 = leap year; 1 = 1st year after leap year;
2 = 2nd year after leap year; 3 = 3rd year after
leap year) and the current month. The brochure
delivered with your watch – "Leap year and full
moon calendar" – will show you the current
leap-year cycle.
2. setting
To set the date, actuate the correction push
piece between 11 and 12 o'clock as many times
as needed to display the current date.
3. setting
To set the day of the week, actuate the correc-
tion push piece between 10 and 11 o'clock as
many times as needed to display the current day.
4. setting
Each time you press the push piece between
6 and 7 o'clock, the moon-phase display will
advance by one day. Advance the lunar disk
until the full moon appears in the aperture.
Consult a moon-phase calendar (brochure
"Leap year and full moon calendar") or at www.
patek.com (click on:
Complications
count the number of days that have elapsed
since the last full moon (relative to the cur-
rent date). To set the correct moon phase,
/
correcting the leap
/
correcting the date
/
correcting the day of the week
/
correcting the moon phase
›
> T he moonphase indicator) and
-
year cycle
› ›
> C ollection > M ovements-