Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
13
winding crown
The winding crown is used to wind the watch
(position 1) and to set the time (position 2).
winding
Crown pushed home: to wind the watch;
power reserve: min. 55 hours.
We recommend that you wind your watch daily at
about the same time, preferably in the morning.
Please wind the watch before you put it on. This
way, you can avoid lateral pressure on the wind-
ing stem, which in the course of the years could
damage the stem tube.
Turn the crown clockwise gently and steadily, and
stop when you feel resistance. Excessively forceful
winding could damage the movement.
setting the time
To set the time, gently pull out the crown and move
the hands in either direction. Once you have set the
correct time, push the crown home again. The day/
night indicator allows you to verify whether the
time displayed by your watch is between 6 a.m. and
6 p.m. (white) or between 6 p.m. and 6 a.m. (blue).
If you advance the hands beyond midnight, all cal-
endar displays will switch to the next day as well.
We advise against moving the hands beyond mid-
night in the counterclockwise direction because
this would desynchronize the calendar mechanism.
However, this will not damage the movement.
Publicité
Table des Matières
