Axis A1001 Guide D'installation page 43

2. Click Import hardware configuration or, if a hardware configuration already exists,
Reset and import hardware configuration.
3. In the file browser dialog that appears, locate and select the hardware configuration file
(*.json) on your computer.
4. Click OK.
Connect the Hardware
To connect the hardware:
1. If required, remove the cover screw, insert a slotted screwdriver into the cover removal
slot and remove the cover.
2. Connect the Axis product to the network and wait until the network connection has
been established and the product has powered up. If the product is not powered through
Power over Ethernet but will use Ethernet and external power instead, also connect the
product to a SELV compliant limited power source (LPS). For more information about the
power connector (DC input), see Specifications on page 20.
Create a new hardware configuration
Follow the instructions according to your requirements:
• How to create a new hardware configuration without peripherals on page 43
• How to create a new hardware configuration for wireless locks on page 43
• How to create a new hardware configuration with elevator control (AXIS A9188) on page
44
How to create a new hardware configuration without peripherals
1. Go to Setup > Hardware Configuration and click Start new hardware configuration.
2. Enter a name for the Axis product.
3. Select the number of connected doors and click Next.
4. Click Close or click the link to view the hardware pin chart.
How to create a new hardware configuration for wireless locks
1. Go to Setup > Hardware Configuration and click Start new hardware configuration.
2. Enter a name for the Axis product.
3. In the list of peripherals, select a manufacturer for a wireless gateway.
4. Depending on what lock manufacturer you got, proceed according to one of the bullets:
- ASSA Aperio: Click the link to view the hardware pin chart or click Close and
go to Setup > Hardware Reconfiguration to complete the configuration, see
Add Assa Aperio
AXIS A1001 Network Door Controller
TM
doors and devices on page 44
43
EN