Installation Steps; Package Contents - Axis A1001 Guide D'installation

Installation Guide - Full Reference
This full reference installation guide provides instructions for how to install AXIS A1001 Network
Door Controller on your network.
• For a quick reference guide, see the printed AXIS A1001 Installation Guide – Quick
Reference that is included in the package contents. The quick reference guide is also
available on www.axis.com
• For other aspects of using the product, see the AXIS A1001 User Manual available
on www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 13.
2. Study the hardware overview. See page 15.
3. Study the specifications. See page 20.
4. Install the hardware. See page 30.
5. Access the product. See Access the Product on page 37.

Package contents

• AXIS A1001 Network Door Controller
• Cable tie (4x)
• Cover screw
• 6-pin plug connector (5x) (plugged into terminal connectors)
- Reader I/O (blue)
- Reader I/O (red)
- Reader data (white)
- Reader data (yellow)
- Power & Relay (orange)
• 4-pin plug connector (5x) (plugged into terminal connectors)
- Audio (white)
- Auxiliary (yellow)
- Door in (blue)
- Door in (red)
- Power lock (orange)
• 2-pin plug connector (plugged into terminal connector)
- Power (black)
AXIS A1001 Network Door Controller
13
EN