Axis A1001 Guide D'installation page 39

Recommended Methods in Windows®
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis
products on the network and assigning them IP addresses in Windows®. Both applications are free
and can be downloaded from www.axis.com/techsup
AXIS IP Utility
Note
The computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the Axis device.
Access your device on the network
1. Connect power and network to the Axis device.
2. Start AXIS IP Utility. All available devices on the network show up in the list
automatically.
3. To access the device from a browser, double-click the name in the list.
Change the IP address of a device
1. Start AXIS IP Utility. All available devices on the network show up in the list
automatically.
2. Right-click the device in the list and select Assign new IP address to selected device.
3. Enter an available IP address and click Assign.
4. To access the device from a browser, double-click the name in the list.
AXIS Device Manager
Access your device on the network
1. Connect power and network to the Axis device.
2. Start AXIS Device Manager.
3. To connect to a server, go to Main menu > Servers > New connection:
- If the server is on the network, select Remote server and select a server from
the drop-down list or enter the IP address or DNS address in the Remote
server field.
- If the server is running locally on the computer, select This computer.
4. To log in as the current Windows user, click Log in.
If you clear Log on as current user you need to enter a username and password in
the next step.
5. Add devices:
AXIS A1001 Network Door Controller
39
EN