Axis A1001 Guide D'installation page 34

AXIS A1001 Network Door Controller
1
Cable tie
2
Network cable
3. Strip the cables and wires as required using a crimp tool.
4. Connect the wires between the door controller and the locks, doors and other devices. For
more information about the connectors and their specifications, see page 18 and page 22.
NO NO NO TICE TICE TICE
• Make sure all the wires are connected correctly. Incorrect wiring could cause damage
to the product.
• Make sure to use wires that meet the requirements. For more information, see Wire
Area on page 22 and, for UL compliance, Requirements for Compliance with UL294 6th
Edition on page 7.
34