3M PROTECTA 2190055 Manuel D'utilisation page 10

5.3 DEFECTS: If the product cannot be returned to service because of an existing defect or unsafe condition, or because it
has been subjected to a fall arrest, either destroy the product or contact 3M regarding possible replacement or repair.
5.4 ProDUCT LIFE: The functional life of the Concrete Bolt Anchor is determined by work conditions and maintenance. As
long as the product passes inspection criteria, it may remain in service.
6.0 MAINTENANCE, SERVICE, and STORAGE
;
Equipment that is in need of maintenance or scheduled for maintenance should be tagged "DO NOT USE". These
equipment tags should not be removed until maintenance is performed.
6.1 CLEANING: Periodically clean the Concrete Bolt Anchor's metal components with a soft brush, warm water, and a mild
soap solution. Ensure parts are thoroughly rinsed with clean water.
6.2 SErVICE: Only 3M or parties authorized in writing by 3M may make repairs to this equipment.
6.3 STorAGE AND TrANSPorT: When not in use, store and transport the Concrete Bolt Anchor and associated Fall
Protection equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may
exist. Thoroughly inspect components after extended storage.
7.0 LABELS and MARKINGS
7.1 LABELS: Figure 11 illustrates labels on the Concrete Bolt Anchor. Labels must be replaced if they are not fully legible.
Information provided on each label is as follows:
1) Installation Procedure
A
2) Concrete Hole Requirements
3) Inspection
1) Company Logo
B
2) Applicable Standards
3) Materials
4) Product Capacity
5) Manufactured (Year/Month) and Lot Number
6) Model Number
7) Inspection Log
8) Warning Statement - Read all instructions.
10