General
Blueair 400 series
Blueair 400 series air purifiers are Wi-Fi enabled
and are available in two models. The 480i mod-
els have built-in sensors for PM2.5, VOC, tem-
perature/humidity, and the 405 models with no
built-in sensors.
Adjustments to the air purifiers can be made
manually anywhere and at any time, either via
the touch buttons on the control panel located
under the flip-up lid, or remotely via the Blueair
Friend
mobile app.
TM
480i model
Wi-Fi
FILTER
AUTO
VOC
PM 2.5
4
The air purifier can also be automatically regulat-
ed based on the air quality readings from the
built-in sensors (480i), or the optional external air
quality monitor Blueair Aware
TM
(405)
For more information on how to use your air
purifier together with the Blueair Aware air
quality monitor, please see the Blueair Aware
owner's manual and the support information.
405 model
Wi-Fi
FILTER
Overview of unit
1
2
4
4
5
6
3
8
Adjusting fan (air flow) speed
Please refer to the table below to see the different options available for controlling your air purifier.
Control options
Manual control via touch buttons on control panel
Remotely via the Blueair Friend mobile app.
Automode based on air quality readings from the built in
sensors. This function may be activated either via the
touch button on the control panel or via the Blueair Friend
mobile app.
Automode based on air quality readings from the external
air quality monitor Blueair Aware. This function is activated
via the Blueair Friend mobile app.
Maximum speed is recommended for fast initial cleaning, during the day or when the air is heavily
polluted. Minimum speed is recommended for nighttime use.
1.
Control panel
2.
Blue LED
3.
Front cover
4
4.
Handle
7
5.
Air inlet (right side)
6.
Air outlet (left side)
7.
Back cover
8.
Particle filter, or
9.
Smokestop
10. Kit box
9
- welcome card
10
- user manual
480i
405
Min
Max
Min
Speed 1
Speed 2
Speed 3
Speed 1
Speed 2
filter
TM
Max
Speed 3
5