Troubleshooting - Krups ARUBA KM9000 Mode D'emploi

KR_CAFETIERE_ARUBA_NC00116597_Mise en page 1 30/10/12 17:09 Page21

TROUBLESHOOTING

PROBLEM
The coffee does not brew
or the machine does not
switch on.
Appliance appears to be
leaking.
It takes a long time to
brew.
SOLUTION
n Check to ensure the appliance is plugged
into a working outlet, and the appliance is
in the «ON» position.
n The water tank is empty.
n There was a power failure.
n There was a power surge. Unplug the
machine, then plug it back in.
n The clock must be reset after a power
failure.
n The Auto-Off function switches off the
coffee maker. Switch off the coffee maker
then switch it back on to make more coffee.
For more information, refer to the section «
Making coffee ».
n Make sure that the water tank has not been
filled beyond the max. fill level.
n It may be time to descale your coffee
dispenser.
n Numerous minerals may accumulate in the
coffee maker's circuit. Periodic descaling of
the machine is recommended. More
frequent descaling may be necessary
depending on the hardness of the water.
For more information,
"Descaling" section.
NOTE: do not dismantle the machine.
English
refer to the
21