Programming The Unit - Krups ARUBA KM9000 Mode D'emploi

KR_CAFETIERE_ARUBA_NC00116597_Mise en page 1 30/10/12 17:09 Page14
English

PROGRAMMING THE UNIT

1 ) P R O G B U T T O N :
Use the PROG button (s) to access the 2 AUTO-START (q) functions of
brewing at preset time. The LCD will display a different function each time
PROG (s) is pressed. The blinking display of previous setting or 9:99 at
first use and the icon show you that the unit is in a programming mode.
A u t o - O n s e t t i n g # 1 :
n Press PROG (s) once Fig.13, P1 displays and the AUTO-START
program #1 is indicated with a red light (r1).
n Press the H and MIN buttons (o) to set a time for the machine to start
brewing automatically. You can press and hold the buttons to move
quickly through the hours or minutes.
n Press PROG (s) when done. You will then be invited to set the second
program. You can skip this second step by pressing PROG (s) once
again.
A u t o - O n s e t t i n g # 2 :
n Press PROG (s) twice Fig.14, P2 appears on the screen and the
AUTO-START program #2 is indicated with a red light (r2). This second
preset start time can be used for days with others wake times (on
weekends for example).
n Press AUTO START button to activate the programmation Fig.15.
n After programming the automatic start time as described above, be sure
to prepare the machine for a brew cycle with water in the tank, coffee in
the brew basket, lid closed and coffee tank securely in place.
n Press the AUTOSTART button (q) to choose preset number 1 or
number 2. You can check the preset times by pressing PROG (s).
n Once the programming is done, the LCD displays pictograms with the
current time.
n The machine will brew automatically at the set time. The program will
need to be activated when needed again just by pressing on
AUTOSTART (q).
The setting of Autostart functions 1 & 2 can be adjusted
only during stand by mode (neither during brewing or
keep warm).
14