Configuration; Setting Led Brightness; Setting The Auto-Off Timer - Brecknell B140 Mode D'emploi

5

Configuration

5.1 Setting LED Brightness

Set the LED brightness by following these instructions:
1.
2.

5.2 Setting the Auto-Off Timer

You can set an auto-off timer so that the scale will power down automatically after a
period of inactivity. This functions only when the scale is powered by the battery.
1.
2.
B140 Counting Scale User Instructions
In normal weighing mode, hold the ON/OFF and PLU1 keys at the same time
until ...
SEtUP is displayed in the PIECE WEIGHT window.
LEd.brt (LEd brightness) is displayed in the COUNT window, and x
(x=1-3) is displayed in the WEIGHT window. This means that the LED
brightness is currently set to x.
Press the 1, 2 or 3 numerical key to change the brightness level (Default
setting: 2). Three is the brightest level. When the brightness you want is
displayed, press the Enter key to save the setting ...
The scale will restart and returns to normal mode.
From normal mode, press and hold the ON/OFF and PLU2 keys at the same
time until the scale beeps ...
SEtUP is displayed in the PIECE WEIGHT window.
A.oFF.t is displayed in the COUNT window.
The current value for the auto-off timer is displayed in the WEIGHT
window. You can choose from 0 to 30 minutes. If you pick 0, auto-off is
disabled and the scale will not power down automatically.
Key in the number of minutes of scale inactivity that will trigger the auto-off
function and press the Enter key to accept this value ...
The scale will restart and return to normal mode.
25