Simple Weighing Mode; Simple Weighing; Tare Weighing - Brecknell B140 Mode D'emploi

3 Operation
This section covers the scale operations of simple weighing, counting, accumulation,
RS232 interface, etc.
3.1

Simple Weighing Mode

3.1.1 Simple Weighing

1.
2.
3.

3.1.2 Tare Weighing

If you want to do net weighing, such as weighing objects in a container, follow these
steps:
1.
2.
3.
4.
5.
6.
B140 Counting Scale User Instructions
Power up the scale and zero the display, if necessary, by pressing the Zero key.
Be sure the scale is displaying weight in your preferred unit of measure. Press
the Unit key, if necessary.
Place item(s) to be weighed on the scale ...
Weight of the item(s) is displayed in the WEIGHT window.
Remove the item(s) from the scale and repeat steps
next item(s).
Power up the scale and zero the display, if necessary, by pressing the Zero key.
Be sure the scale is displaying weight in your preferred unit of measure. Press
the Unit key, if necessary.
Place the item to be tared (usually a container) on the scale ...
Weight of the item is displayed in the WEIGHT window.
Press the Tare key ...
The weight is tared, 0 weight is displayed and the Tare annunciator
lights.
Place item(s) to be weighed on the scale ...
Net weight of the item(s) is displayed.
To remove a tare, remove everything from the scale platform and press the
Tare key or press the Zero key if gross weight is less than 2% of capacity ...
0 weight is displayed and the Tare annunciator light turns off. The unit is
now in gross weighing mode.
Repeat the steps above for other tare weights.
1 through 3 to weigh the
15