Brecknell B140 Mode D'emploi page 14

Add Total
Print
Unit
Currency
Zero
Tare
ON/OFF
EXIT
ON/OFF/EXIT+PT2
ON/OFF/EXIT+PLU1
ON/OFF/EXIT+PLU2
ON/OFF/EXIT+PLU3
ON/OFF/EXIT+PLU4
ON/OFF/EXIT+PLU5
ON/OFF/EXIT+PLU6
14
Use to add the displayed counts to a piece count accumulator
(Memory +) in Counting mode, or to add the displayed value to a
value accumulator in Coin Counting mode.
Use to send data to the RS232 port, if it installed
In Counting mode, use to switch displayed weights or piece weight
between kg and lb.
In Coin Counting mode, use to select type of currency from US
dollars, Great British Pounds or Euro.
Set a new zero point. Zero range capability is ±2% of scale
capacity.
Use to zero off, up to 100% of capacity, an empty container or
weight. Use of tare will reduce the scale's maximum weight
capacity by the tare value stored.
Use to turn off display for extended battery life or to reset the scale
to normal weighing mode.
Ignore a keyed value and Exit from input data mode.
Use to enter calibration mode
Use to enter the LED's brightness setup mode
Use to enter the auto-off time setup mode
Use to view A/D counts or voltage
Use to enter RS232 setup mode
Use to enter the date and time setup mode
Use to enter ID setup mode
B140 Counting Scale User Instructions