Rs232 Interface And Rtc (Real Time Clock); In General Counting Mode; In General Counting And Display Accumulation Mode - Brecknell B140 Mode D'emploi

6.
(1) Remove the counted items from the scale and let the scale return to a stable
condition before you count more items and perform the next accumulation.
(2)There are nine accumulator memories for nine different items; PLU1 - PLU8 piece
weight channels and a temporary piece weight. That means different piece weights
have their own accumulator memory.

3.3 RS232 Interface and RTC (Real Time Clock)

The RS232 interface is optional. When it is installed current data can be sent to this
port by pressing the Print key. The hardware real time clock (RTC) and backup battery
are also optional. If the RTC is installed, you only need to modify the date and time
when they are not correct. If RTC is not installed, a software RTC can be used. You
need to set the date and time every time the scale is reset. If the scale's ID, date or time
are active, they can be printed out. The format is similar to the examples below:

3.3.1 In General Counting mode:

Scale ID:
Date:
Time:
Gross:
Tare:
Net:
Merchandise:
Piece Weight:
Count:

3.3.2 In General Counting and Display Accumulation mode:

Scale ID:
Date:
Time:
Merchandise:
Piece Weight:
Add number:
Total Count:
22
The scale will not accumulate more than 999 times or 999999 counts. If this
occurs the display will show DSP.OVR. This means the display is over range.
123456
2012-05-16
16:23:53
0.0675kg
12.5000kg
PLU1
0.0005kg
25000pcs
123456
2012-05-16
16:23:55
PLU1
0.0005kg
12
25000pcs
;(YYYY-MM-DD)
;(HH:MM:SS)
12.5675kg
;(PLU1,PLU2...PLU8, Tmp)
;(PLU1,PLU2...PLU8, Tmp)
B140 Counting Scale User Instructions