Placing Jumper Links - Miller Delta-Fab Manuel Du Propriétaire

4-14. Placing Jumper Links

230 VOLTS
1
Tools Needed:
3/8 in.
3/8 in.
460 VOLTS
2
Do not overtighten
jumper link nuts.
! Disconnect and lockout/tag-
out input power before
installing or moving jumper
links.
Check input voltage available at
site.
1 Jumper Link Label
Check label − only one is on unit.
2 Jumper Links
Move jumper links to match input
voltage.
Close and secure access door, or
go on to Section 4-15.
575 VOLTS
Ref. S-174 973-B
Ref. 800 103-A
OM-2241 Page 19