Safety Testing Certifications - Tuthill FILL-RITE NX3200 Série Mode D'emploi

nextec™ — Predicts. Protects. Performs.

Safety Testing Certifications

This Fill-Rite line of pumps have been safety tested for compliance to strict regulatory standards. Check the information
on the motor barrel label of your pump to determine the certifications that are applicable to your particular model.
The following standards were used to show compliance in North America:
UL 674 – Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations, 5th Edition.
The following standards were used to show compliance in the European Union:
Directive 2006/42/EC – Directive on machinery.
EN 809:1998 +A:2009 – Pumps and pump units for liquids – Common safety requirements.
EN ISO 12100:2010 – Safety of Machinery – Basic concepts, general principles for design.
Directive 2004/108/EC – Electromagnetic compatibility.
Directive 2011/65/EU – Restrictions of the use of certain hazardous substances in electrical and electronic equipment.
ISO 80079-36 = Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method
and requirements.
ISO 80079-37 = Explosive atmospheres - Part 37: Non-electical equipment for explosive atmospheres - Non-electrical
type of protection constructional safety "c", control over ignition source "b", liquid immursion "k".
Tuthill Corporation
8825 Aviation Drive | Fort Wayne, Indiana, USA 46809
P (800) 634-2695 | (260) 747-7524
F (800) 866-4681
www.tuthill.com
www.fillrite.com
www.sotera.com
Tuthill UK LTD.
Birkdale Close Manners Industrial Estate
Ilkeston, Derbyshire
DE7 8YA
UK
P +44 0 115 932 5226
F+44 0 115 932 4816
DC002234-000 Rev. 1